I'm wondering if Datavideo solutions are compatible with OBS. This is a possible solution I'm looking at using for a project and the client would like to continue using OBS for streaming. I don't know much about OBS and would like to know if the cameras and audio devices will be able to connect to OBS.
Datavideo Solution Compatibility
- Thread starter nnoonan
- Start date
KUCTech
Member
Hello nnoonan: I see that your post is almost 6 months old, so hopefully by now you have an acceptable solution for your client. However, in case it helps, I will pass on my comments on OBS and DataVideo equipment.
I manage and operate the live streaming operation for a church, and while our configuration does not have as many components as your design, we are running OBS Studio with DataVideo cameras. We have 2 X DataVideo PTC-140NDI PTZ Cameras, which are connected via the LAN to OBS Studio (running on a Windows 11 PC). So in answer to your question: I'm wondering if Datavideo solutions are compatible with OBS, we have not experienced problems with connectivity or compatibility. As far as controlling the cameras is concerned, our needs are satisfied with the OBS Studio PTZ Control Plugin. Audio is received by OBS from the main mixer, through a VOLT 2 USB Audio Interface.
I hope this is helpful - good luck with your project.
Regards,
Tony N.
I manage and operate the live streaming operation for a church, and while our configuration does not have as many components as your design, we are running OBS Studio with DataVideo cameras. We have 2 X DataVideo PTC-140NDI PTZ Cameras, which are connected via the LAN to OBS Studio (running on a Windows 11 PC). So in answer to your question: I'm wondering if Datavideo solutions are compatible with OBS, we have not experienced problems with connectivity or compatibility. As far as controlling the cameras is concerned, our needs are satisfied with the OBS Studio PTZ Control Plugin. Audio is received by OBS from the main mixer, through a VOLT 2 USB Audio Interface.
I hope this is helpful - good luck with your project.
Regards,
Tony N.